Your Guide to Audiopipe 15-inch Car Subwoofers
If you pick the right subwoofers, you have the power to make driving to work every day a blast. Audiopipe makes quite a few different types of 15-inch subwoofers, and these speakers are designed to make listening to music in your car more enjoyable whether you're on a joyride through the countryside or commuting to your job.
What types of woofers does this company manufacture?This company makes more than 10 different models of 15-inch subwoofers. Their specifications, like RMS watts, peak watts, and ohms, vary widely. However, they are all designed to fit 15-inch woofer enclosures. Here are a few of the models offered by Audiopipe:
- TXXBD415: These Audiopipe woofers draw 1,400 RMS watts and 2,800 peak watts, and they produce 4 ohms each. In addition, they have 3.3-inch voice coils.
- TXXBD315: These woofers draw 1,200 in RMS wattage and 2,400 in peak wattage, and they put out 4 ohms. The voice coils in these woofers are 3-inches long.
- TXXBD215: These entry-level woofers have a peak wattage of 1,800 and an RMS wattage of 900. They put out 4 ohms and they have 3-inch voice coils.
Before you make a final decision, make sure that your amplifier can handle the peak wattage of the woofer that you like. You'll also want to ensure that your battery capacity is large enough to handle any extra power draw.
It's also important to accurately measure the speaker enclosure that you plan to use with your subwoofer to make sure you're choosing the right size product. Lastly, you should take a look at your stereo to determine which types of end terminals it is compatible with. That will be important information to know when it's time to hook up speaker wire to your stereo.
How do you install Audiopipe woofers?After you've acquired the subwoofers that you think are best for your car, you'll need to install them in your vehicle. To do so, follow these steps:
- Step 1: Install your woofers in your amplifier cabinet. If you drive a sedan, place your amp cabinet in the trunk. If you drive a hatchback or SUV, place the cabinet in the back of the car.
- Step 2: Run wire from the amplifier cabinet to the front of the car. Connect the wire to your stereo. If your woofers have dedicated power lines, connect these lines to the battery.
- Step 3: Turn on the stereo and play some audio. Listen closely to your woofers to ensure that the installation was a success.